Torque Activated Pressure Sensitive Seals Cap Liners - 24mm (0.94") - 500 PCS - Made in USA- for Glass & Plastic Bottles & Containers - No Induction Sealer Needed - Black (500)

These polystyrene botlle and jar foam liner seals coated with torque-activated adhesive require no tools and no heat induction equipment. For proper application consider the following recommendations: ● Make sure your pressure sensitive liner size matches the bottle or jar opening. These 24 mm (0.94 inches) seals are to be used with any bottles or jars that use 24 mm caps ● Completely clean the jar top with clean cloth and alcohol to clear of liquid and/or solids. Center jar seal on top of you plastic or glass bottle or jar, and apply. The white side of the seal shall be facing down, the side with black letters shall be facing up. ● Screw metal or plastic cap on bottle. Make sure the liner and cap are tightly secured on the container. ● Once the cap is applied, it should not be removed for at least 24 hours to ensure proper adhesion. Although depending on your application, the adhesion process might take significantly less time. ● Seals can be used with glass and plastic bottles or jars and with lined or unlined caps. These pressure sensitive liners are best for use with powder or dry products. ● Avoid overfilling your containers! ● Once seal is removed, it cannot be reapplied. ● Not suitable for applications containing oil.

• REAL PRESSURE-SENSITIVE SEAL – ADHERES TO BOTTLE RIM - These torque-activated liners create a real seal by adhering to the rim of the bottle or jar WHEN THE CAP IS TIGHTENED. Unlike simple foam inserts that only sit inside the cap, pressure-sensitive liners stick to the container opening and remain attached after the cap is removed.
• FITS 24 MM CAPS (APPROX. 0.94 INCH / 24MM) - Designed for caps with approximately 24 mm inside diameter (about 0.94"). Commonly used for essential oil bottles, spice jars, supplements, cosmetics, herbs, powders and other small packaging containers
• NO HEAT OR INDUCTION SEALER REQUIRED - Place the liner inside the cap, SCREW THE CAP ONTO THE CONTAINER and allow about 24 hours for the seal to form. The liner bonds to the container rim using pressure from the cap.
• HELPS PROVIDE TAMPER-EVIDENT PACKAGING - Once applied, the liner stays attached to the bottle or jar opening when the cap is removed, helping show that the product has not been opened.
• WORKS WITH GLASS AND PLASTIC BOTTLES & JARS - Compatible with many containers using 24 mm / 24mm caps, including packaging for essential oils, spices, supplements, cosmetics, herbs, powders and small food products.