CHANCS 895 DC Motor Saw Dual Output Shaft High Power Low Noise DC 24V 12000RPM Mini Saw Drill for Wood Cutting Polishing

*Attention. 1.The table saw is suitable for use with a voltage of 24V DC, working voltage greater than 6A. 2.When installing, please tighten the saw blade and screws so that the saw blade will not fly out and hurt people when the motor starts. *Specifications of motor: Rated voltage: 24V; No-Load Speed: 12000 RPM; Torque:≤10Kgf.cm; No-load current: 0.5A; Power：150W; Shaft Diameter: 5mm; Shaft length: 16mm; Length：72mm; Width: 48mm; Mounting hole distance: 29mm(M4 screws)/32mm(M5 screws); *Size of Bracket: Bracket material：steel； Thickness of bracket: 2.8-3mm； Length: 50mm ； Width: 53mm ； Height: 62mm ； Mounting hole diameter: 5.2mm/4.2mm ； *B12 drill chuck clamping range is 1.5-10mm(0.06"-0.39"). M10 bush is suitable for saw blade with inner diameter 16mm（0.63"）, outer diameter 110mm(4.33"). *Package Include: 1 x Motor 1 x Bracket 4 x Wrenches 1 x Saw Blade 1 x B10-5mm Connecting Rod 1 x M10-5mm Connecting Rod 1 x Drill Chuck 1 x Drill Chuck Handle

• *The set uses a dual-outlet motor, one end connected to the chuck, one end connected to the saw blade, high concentricity, linear cutting, suitable for DIY production, model making.
• *The saw blade can cut wood, pc sheet, pvc sheet and many other sheets. The clamping range of drill bit is 1.5-10mm, which can meet most of the needs.
• *Attention. 1.The table saw is suitable for use with a voltage of 24V DC, working voltage greater than 6A. 2.When installing, please tighten the saw blade and screws so that the saw blade will not fly out and hurt people when the motor starts.
• *B12 drill chuck clamping range is 1.5-10mm(0.06"-0.39"). M10 bush is suitable for saw blade with inner diameter 16mm（0.63"）, outer diameter 110mm(4.33").
• *Package Include: 1 x Motor 1 x Bracket 4 x Wrenches 1 x Saw Blade 1 x B10-5mm Connecting Rod 1 x M10-5mm Connecting Rod 1 x Drill Chuck